A full line of Gardner Denver Rotary Screw Compressors – I & M Industrials offers sales and service from the Greenville location to all the Carolina’s including South Carolina and the Augusta GA area. For Inquiries about our compressors and compressed air solutions use the form below or contact our compressor specialists at 864-277-2450,
Gardner Denver L-Series – Fixed Speed Rotary Screw Compressor – 5 – 400 HP (L04 – L290)
Gardner Denver’s L-Series fixed speed oil-lubricated rotary screw compressors range from 5 HP to 400 HP. All compressors are fully enclosed for low noise operation while maintaining extremely small footprints. With standard features including TEFC motors, Wye-Delta starting, microprocessor controls and grouped service components, the L Series delivers exceptional value.
The L Series product line is designed with a high efficiency, high output, Gardner Denver compression element with slow rotational speeds, resulting in reduced energy usage and increased reliability. Focusing on big and little details, our innovative compressor concepts save you time and money. L Series compressors are available in belt drive and direct drive packages and air or water cooled options.
When space is limited, look to our clean AirStation configurations. Equipped with mounted tank and dryer options, our AirStation package is sure to be a good fit.
More about the L-Series on the GD website.
.
Gardner Denver LRS-Series – Variable Speed Rotary Screw Compressor – 10-400HP (L07RS – L290RS)
Gardner Denver LRS Series variable speed compressors set’s a new standard in its comprehensive range of variable speed oil-lubricated rotary screw air compressors from 10 HP to 400 HP. The LRS Series rotary screw compressors employ an innovating variable speed compressors inverter drive system that precisely matches power consumption with air demand, providing world-class energy efficiency.
The LRS rotary screw premium efficiency airend has a high output compression element with slow rotational speed, which further reduces energy costs and increases reliability. Service components are conveniently grouped for reduced downtime and economical maintenance. A quiet enclosure and small footprint make the LRS Series a versatile variable speed rotary screw compressor line.
When space is limited, look to our clean AirStation configuraAtions. Equipped with mounted tank and dryer options, our AirStation package is sure to be a good fit.
More about the LRS-Series here
New Electra Saver II G2 Rotary Screw Air Compressors
- Fixed Speed Single Stage Rotary Screw Air Compressors
- 250-300 HP- New Range
- Unenclosed or Enclosed
- Slow Speed 1800 RPM Motors
- 100, 125, 150, 175, and 200 PSI
The Electra Saver II G2 builds on the thousands of hours of reliability that were established by its predecessor. Founded on slow-speed, 1800 rpm design principles the new Electra Saver II G2 rotary screw compressors feature super-sized bearings and up to 40 percent larger airends than the competition. The larger airends, running at slower speeds, maximize efficiency and reduce wear and tear, while the permanent alignment of the airend and motor ensure maximum coupling and bearing life.
Reduced downtime due to service-friendly package design 
- Spin-on/spin off oil filter
- Tip-out cooler
- Unenclosed package allows for quick access to all service items
Slow speed, oversized design ensures decades of dependability
- Larger airends, running at slower speeds, maximize efficiency and increase reliability
- There are more Electra Saver and Electra Saver II compressors running in North America than any other rotary screw compressor
Governor Controller
= Information at your fingertips
- Easy to use touchscreen display & navigation
- Full-Color LCD Screen
- Built-in digital gauges
- Advanced machine diagnostics
- Real-time and historical trending
Electra Saver II G2 (30-225 kW / 40-300 HP) – Slow Speed Single Stage
40 – 300HP 
Founded on slow-speed, 1800 rpm design principles the Electra Saver II G2 40-300 hp compressors feature super-sized bearings and up to 40 percent larger airends than the competition. The larger airends, running at slower speeds, maximize efficiency and reduce wear and tear, while the permanent alignment of the airend and motor ensure maximum coupling and bearing life.
- 60Hz
- 40 – 300hp
- 204-1541 cfm
- Direct-Gear Drive
- Enclosed or Un-Enclosed
- 68-78 dBA
Learn more about the Electra Saver II G2
Electra Saver G2 (55-75 kW / 75-300 HP) – Slow Speed Single Stage
75 – 300 HP 
Electra Saver G2 delivers substantial performance improvements, serviceability enhancements, and controller capabilities to an already proven and reliable compressor design. With infinite positions in an operating range of 40% to 100% capacity, compressor efficiency is maximized. This rotary screw compressor technology eliminates wide pressure fluctuations and massive storage requirements. Air or water cooled.
- 1800 rpm ODP and TEFC options
- 75 – 300hp
- 342 – 1478 cfm
- Stainless steel control lines
- High performance direct-gear driven airend
- NEMA 4 control enclosure
- Wye-delta starter
- AirSmart G2 microprocessor controller
- Patented Turn Valve™ technology
Learn more about the Electra Saver G2
Electra Saver: Variable Displacement and Turn Valve
350 – 500 HP . 
For partial load demand situations, between 60-100% plant capacity, the experienced Electra Saver unit featuring the patented Turn Valve technology offers greater energy savings you will immediately notice!
Learn more about the Electra-Saver here
Electra TS and TSV – Fixed and Variable Speed 2-Stage Rotary Screw Compressor
200 – 300 HP 
- Electra TS / TSV
- Fixed Speed & Variable Speed Two-Stage Rotary Screw Air Compressors
- 200-300 HP (150-225 kW)
- Enclosed or Unenclosed
Featuring a semi-integrated over/under two-stage proven airend with integral cartridge filter makes a compact, lean and easy-to-service package. The Electra TS/TSV utilizes commonality in parts and 200 – 300 HP components with the Electra Saver/Saver II 200–300 HP packages.
This truly makes the Gardner Denver Electra series a comprehensive and complete family portfolio. Following the good, better and best philosophy of supporting customers in ALL applications and market segments.
TSV 2-Stage VFD Compressor: https://www.gardnerdenver.com/en-us/lubricated-rotary-screw-compressors-us/electra-tsv
TS 2-Stage Fixed Speed Compressor https://www.gardnerdenver.com/en-us/lubricated-rotary-screw-compressors-us/electra-ts
Hydrovane – The Rotary Vane Compressor
The Hydrovane series rotary vane compressors are versatile, powerful, reliable and cost effective.
They can be found in trains, ships, engineering, distilling, brewing, packaging sites and in large and small industrial units throughout the world. In fact they are the perfect business solution to your requirement for reliable, high quality compressed air.
2 – 15 HP 
The low noise operation of the Hydrovane air compressor means that they can be installed right alongside your equipment. Most models are available as open units.
Gardner Denver Service
Protect Your Investment and Leave the Worry to Us
Service
Regular maintenance and service of Gardner Denver products is critical to the performance and longevity of the equipment. Only Gardner Denver can provide:
•The assurance that the investment will provide a lifetime of productivity.
•Aftermarket parts and services that are engineered for use in Gardner Denver products.
•Peace of mind of turning to one supplier and one source for all aftermarket needs.
Platinum Service Offerings
- Platinum Guard
Platinum Guard is a preventative maintenance agreement serviced by Gardner Denver Authorized Distributors using genuine OEM parts and lubricants.
Guard your investment with a service plan that keeps your compressor (and operations) running with few interruptions. - Platinum Trust
The multi-year Platinum Trust service agreement offers peace of mind with extended coverage beyond the major components.
The entire compressor package is included.
Protect your equipment against unforeseen events with this service offering and guarantee consistent, reliable coverage from partners you trust.
For any question about Platinum Guard and Platinum Trust contact our Sales department
Gardner Denver Remanufactured Compressors
Remanufactured Airends is a cost effective solution to new compressors.
I & M offers the complete Gardner Denver line of remanufactured airends.
Lubrication: Please check out our service page for compressor oils and lubricants